Matek Sys Flight Controller F411-WSE

FC Specifications
MCU: 100MHz STM32F411CEU6
IMU: MPU6000 (SPI)
Baro: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: No
2x Uarts
2x Softserial-Tx
2x Motors, 4x Servos outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Switchable Dual Camera Inputs
TR/SA VTX control: Yes
WS2812 Led control : Yes
Beeper output: Yes
RSSI: Yes
Voltage devider for Analog Airspeed sensor: Yes

FC Firmware
INAV Target: MATEKF411SE

PDB
Input voltage range: 6~30V (2~6S LiPo)
2x ESC power pads
Battery Voltage Sensor: 1:10 (Scale 1100)
Current Senor: 78A, 3.3V ADC, Scale 423

BEC 5V output
Designed for Flight controller, Receiver, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed module
Continuous current: 2 Amps, Max.3A(5seconds/minute)

BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V option
Continuous current: 3.5 Amps, Max.5A(5seconds/minute)

BEC 3.3V output
Designed for Baro / Compass module/OLED and Spektrum RX
Linear Regulator
Continuous current: 200mA

Physical
Mounting: 24 x 24mm, Φ2mm
Dimensions: 28 x 28 x 14 mm
Weight: 8.5g